James Tank Badges 8293B - £55.00 Pair (Bonding Required)
British and US
*The order form button will open a new tab with an order form. You should ensure that if you want to order multiple items you include them on the same order form.
Our domed badges are inset into the rubber discs non-drilled (Bonding Required). They have
a plain aluminium domed spacer between the badge and rubber which gives
added strength and ensure that the front of the badge is flush with the face
of the rubber.
These are 2.375 inch dia with hole centres at 2.0625 inch.
We have endeavoured to make these as near to the original design as
practically possible. The originals were injection moulded with the back of
the badge in relief with the colours applied as a secondary process.
To produce these today in the same manner would be prohibitively expensive
with regard to tooling and reverse printing costs. The originals being
plastic tended to crack in the vicinity of the holes of the fixing screws
These badges are non-drilled but with bonding required. We will not be supplying bonding agent, this is done by the customer and at their own risk. Badge 60mm dia. Rubber 76mm dia.